Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to get rotten or rusty like aluminum and timber.

It is important to clean and oil UPVC windows and doors on a regular basis. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a great deal of damage to your home, making it very hazardous and possibly fatal. You should take the time to make sure that your windows are in good shape.

For single pane windows it can be relatively simple to replace them, and the replacement will generally fit within the frame that was previously installed easily. If windows with double panes are joined by internal beading, it will be more difficult to remove and replace the old panes. In this instance you’ll need source some plastic spacers that will assist the new pane to fit perfectly into the frame of the window.

Wearing eye protection and heavy gloves is a must if you plan to remove the glass by yourself. It is also recommended to lay down a dropcloth before you start working on the glass so that any shards will fall onto the cloth instead of onto the floor where they can be trampled upon and cause further damage.

Once the glass is removed and the glass is removed, it’s a good idea to cover the gap with some clear packaging tape or duct tape to prevent water and drafts from entering the home until a professional can come out and repair the window. This will also provide a barrier to prevent any criminals from getting into your home. If the gap is large, you might want to consider using a security door that has an integrated window, since it offers the best of both worlds.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash window repairs near me. In time, they could be affected by a variety of issues that include sagging. A sagging uPVC windows can cause problems with light, draughts, and even security. It is crucial to act as soon as you notice your uPVC windows are sliding.

To repair a window that is sagging, you can try to reposition the hinges. To do this, you’ll have to open the window so that you can access the frame. Then, you can remove the hinges at the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you’ve adjusted the hinges, close the window and check for an appropriate fit. If you’re happy with the fit, tighten the screws until they stay in place.

If you aren’t able to move the hinges you may require replacing the seal. Rubber seals can dry out and lose their elasticity over time, leading them to loose their elasticity. If this happens, it’s important to replace the seal as fast as possible to ensure your uPVC windows are waterproof and safe from drafts.

UPVC handles can also become loose. Most often this is due to screws that have come loose over time. However, it can be due to the fact that the handle mechanism has worn out. It’s relatively easy to fix a loose uPVC hand. The first step is to close your window and do an initial test to ensure that it fits. The corner joints of the sash need to align with the casing joint. If it doesn’t then you can use the screwdriver to loosen up the handle. Then turn the mechanism into position.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains it’s crucial to take action. Water leaks through windows can cause structural damage to your home and also affect your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be completed by any DIYer who has the ability. Depending on how serious the issue is, old caulking may have to be removed. It is crucial to keep in mind that when it is about uPVC window repairs, do not be tempted to apply too much caulk and then make the area harder to clean and reduce your energy efficiency.

Make sure that the drainage holes are free of debris inside them and that the sill pan is properly angled to drain away from the window. In more serious instances, you might need to consider replacing the window.

Other indicators of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. This mold thrives in damp environments and can quickly spread across the home.

It is also important to note that if the leak originates from the glass in your double glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sliding. Again this can easily be repaired by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your upvc window repairs window is difficult to open or if it opens with a breeze. Any competent DIYer can replace the hinges in a matter of minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that have hinges and like any mechanical part they will wear out over time. It’s easy to replace a hinge on a window but it’s much easier if someone helps hold the frame.

Check that the uPVC hinges are closed and window repairs open in the correct direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The problem can be caused due to opening the window in the wrong way or by a poor installation at the factory. Sending us a photo via our website will often solve the issue. We are more than happy to give suggestions.

It is also important to ensure that the hinges are lubricated on a regular basis. This can be done by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window operate and close more easily. It can also stop corrosion and reduce the possibility of sticking. This is recommended to be done at least once a year. WD40 or other solvent-based lubricants are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by different causes. The hinges, also due to wear and tear could become misaligned. This causes an opening to appear where the sash meets the frame. They can be fixed by giving them a thorough clean, however when they’re beyond repair, it may be necessary to have them realigned or replaced. Second, the interlock can also become disaligned. It is located on the hinge’s side and might require to be cleaned. In some cases, it may be necessary to replace the hinges.

The next most common cause of draughts is the window seals. They are susceptible to being worn out or damaged over time, and let air escape through these gaps. Replacing these with high-quality weatherstripping will help to stop draughts. Replace the windows made of upvc with low-emissivity glass. This will help regulate indoor temperatures and decrease the risk of draughts.

The last way to reduce draughts effectively is by using a Draught-exclusion device. These are usually made of fabric tubes filled with a filler which can be placed over your window sill. They will keep your home warm by blocking out cold air.

The windows made of upvc can continue to provide excellent insulation and security in your home by performing regular maintenance and Window Repairs repairs. It is essential to remember that all windows eventually become worn out, and it may be more cost-effective to replace them rather than repair them. If you have any problems with your upvc window, it’s best to consult an expert as soon as possible.